2000 Toyota Tundra Cannot Turn Ignition On With Key
Much better than WD-40 because it wont attract dust.
2000 toyota tundra cannot turn ignition on with key. Turn the key quickly from the Run position to the Off position five times. The key slides in and out easily but will not turn past the ACC setting. This will disable the alarm and allow you to start the car again.
This problem just started at random today. If there is no current check the fuse. 1 YO battery and starter.
2000 - Starter Did Not Disengage After Turned The Ignition Off. The ParkBrake Pedal interlock seems to be operating correctly. When I got ready to leave the Fed Ex place I had parked at the key would not turn in the ignition.
Your key is worn or damaged. While it would seem like the most likely cause for a key to get stuck in the ignition at first compared to it being a bad key this is not nearly as likely. My truck is a 2000 with under 70K miles.
Our technicians are certified to replace the ignition lock cylinder in your 2000 Toyota Tundra allowing you to retain your original keys. Turn ignition key and nothing happens. If you have a good fuse then replace the fuel pump relay.
144 idle wlights on. Turn the key quickly from the Run position to the Off position five times. Checked voltage at battery.