2000 Toyota Tundra Headlight Vertical Adjustment

Toyota locates the adjustments screws on the headlight housing.

2000 toyota tundra headlight vertical adjustment. Perform lo beam aim adjustment. Make with aa bit of chalk the upper most spot the headlight shines. Have a picture of what the headlights look like against a wall.

Adjust the vertical headlight aim into the specified range by turning aiming screw A with a screwdriver. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tapeline on the wall. Turn it the other way till you have it the way you want.

Joined Feb 3 2008 6236 Posts. I installed them straight out of the box so I was hoping they were close to what I need. Turn the horizontal screw.

They come with some cheap. Toyota Tundra Service Manual. Theres another bolt at the bottom of the headlight.

Mr Drummer Registered. 3 Release the retaining spring to loosen the old bulb and then pull it directly out of the socket. The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light.

Ive gone to three separate dealers over the last few years and. The picture below is from early 2nd gen Tundra. The headlight aim moves down when turning the aiming screw clockwise and moves up when turning the aiming screw counterclockwise.