2000 Toyota Tundra Rear Bumper Removal

The bumper is secured using four 13mm nuts.

2000 toyota tundra rear bumper removal. Toyota Tundra Rear Bumper Removal. Next underneath the bumper there are 2 clips that you need to pull out with a flat head screw driver they point straight to the ground and are holding the bumper extenders in place Then the easy part remove the 14mm bolts 2 on each side attached to the frame. -remove the cover of the bumper underneath and Unscrew two screws on each side twisted upside down-around the bottom part Unscrew the screws spun up-assistant exempt corners of the latches in the wings and remove the bumper from the guides themselves-remove the connector from the fog lamp if any-remove connector from the PDC if any.

After those bolts are removed you can pull the sides of the cover away from the quarter. The hardest part of removing the bumper is getting under the truck and popping the small plastic tabs that hold the black top cover on. Removal of front bumper.

Remove lights from two connectors 28. If you wish to remove the entire set up from the frame remove the bolts attaching the brackets to the frame rails. -around the bottom part Unscrew the screws and take out the caps twisted and inserted from the bottom up.

I have used the search feature and I still cant find it. 2000 Toyota Tundra 1099. Remove the rear bumper.

Rear bumper is pretty easy. Unplug and remove the Trailer Plug. Remove the 2 screws that hold on the license plate covers.

Can someone please help me out I thought I saw it on this forum or maybe it was on another forum. Bumper end cover removal. Squeeze and push clamps 31 to remove rubber.