2000 Toyota Tundra Upper Ball Joint Removal
Replace upper arm assembly when measured value exceeds specification.
2000 toyota tundra upper ball joint removal. You will need a 35mm socket to remove the nut. It was just a precaution but I would do it again. The lower ball joint boot is pretty big.
1995-04 Toyota Tacoma 4WD Prerunner 2WD 1996-02 Toyota 4Runner 2WD 4WD 2000-06 Toyota Tundra 2WD 4WD 2001-08 Toyota Sequoia 2WD 4WD Removal 1. Grind the rivets or use a cold chisel and remove the ball joint. Growit Mar 14.
Discussion in 1st Gen Tundras 2000-2006 started by growit Mar 14. 314392 live center forcing screw. In the picture I am pushing out the passenger side upper ball joint.
The ball joints will be replaced under the recall. The kit includes a press to remove the stock upper ball joints and a press to install the new slug adapters supplied with your TOTAL CHAOS suspension kit. Inspection Using preload socket ensure breakaway torque for upper arm ball joint is 3-13 INCH lbs.
Another Upper ball joint removal technique. 1ST GEN TOYOTA TUNDRA 2000-2006. Clean up the area with some sandpaper dirt loose rust etcand put the new joint in.
The headache saved from trying to get the old ball joint out is worth the money. There are two separate recalls combined here one applies to 2002-2004 and the second to 2004-2006 Models. 538591Replace the forcing screw in the C-frame with OTC No.