2006 Toyota Tundra Reset Low Tire Pressure Light

The tire placard located on the door panel.

2006 toyota tundra reset low tire pressure light. Adjust the pressure of all the installed tires to the specified level. Hold the TPMS reset button until the tire pressure light blinks three times then release it. All information how to reset low tire pressure warning light is taken from Toyota Tundra 2 generation owners manual.

You will have to finagle it out from under the gauge cluster piece. There are two ways to reset the indicator light - the first is to hold down the button hidden under the dashboard next to the steering column until the light goes out. Then inflate again and drive for a couple of minutes at 15 mph to manually calibrate the sensors.

Stop the vehicle and turn off the engine. Advertisement Tire pressure monitoring systems are mandated by. How do I reset my low tire pressure warning light on my 2006 toyota tundra.

Tire pressure reset process cannot be done while the vehicle is moving. Push and hold the reset switch until the low tire pressure warning light blinks three times. The system should only be reset when all of the tires.

I took a trip to the dessert in 100 degree weather and the tire pressure wen. The tire placard located on the door panel. Then while the truck is running hold the tire pressure button for a few seconds until it blinks.

Inflate each tire to its ideal PSI then deflate the tires to zero. Apply the parking brake and turn the ignition to ON position with the engine OFF not the ACC position. Start the car and wait 20 minutes for the sensor to refresh.