2006 Toyota Tundra Transmission Fluid Fill

After servicing the transmission you must refill the transmission with the correct amount of fluid.

2006 toyota tundra transmission fluid fill. I show you how i changed all the transmission fluid in my 2007 Toyota Tundra 47. If you should remove the overflow plug now have a pan ready as fluid will spill. Procedure for changing automatic transmission filter and flushing transmission fluid for the model A750E and A750F transmissions on a 2007 Toyota Tundra.

Surely it can be done by someone else. Getting Started - Prepare for the repair. First of all is your Sequoia a 1st generation or 2nd generation.

You might need to expand the end of the tubing with a pair of needle nose pliers so it will fit over the transmission line. The fluid wont be under any significant pressure so a hose clamp isnt necessary. Run engine to operating temperature and remove the overflow plug.

Remove Dipstick - Access point for transmission fluid. Around 2 12 quarts to drain and fill pan fill pan till fluid comes out of overflow port. BEFORE TRANSMISSION FILL.

Place your drain pan underneath the transmission fluid pan and remove the 14mm drain plug. While changing the u-joint and carrier bearing about 12 qt transmission fluid drained out after pulling out the drive shaft. It should have a minimal amount of fluid in it about 3 cc.

The engine in your 2002 Toyota Tundra should be running when you perform a transmission fluid level check otherwise it will be inaccurate. Thank you very much for watching and God blesselectric fluid extractor pump. 04 06 Sealed Transmission Fluid Change Interval The Mother Thread.