Toyota Tundra Air Injection Pump Bypass

My 2007 Toyota Tundra went into Limp Mode when multiple dash warning lights came on.

Toyota tundra air injection pump bypass. Instead of costly repair to replace air injection pumps etc. Use the blank plug caps instead of just taping off the connectors. Home of the Hewitt-Tech ToyotaLexus Secondary Air Injection System Bypass Kits.

2008 Tundra 57L was in limp mode due to CEL being on code P2445 I found water in air injection pump regulator on bank 1 and had corrosion in the valve assembly so would obviously need new valve and air pump which was around 1200 cost in parts alone. Toyota Tundra 2007 with engine check light on also the 4LO. The whole point of the bypass kit is to take care of a failed secondary air injection system wihtout spending all the money to fix it.

Fits Tundra 2011 - 2014 Air Injection System Air Pump - Repair or Replace. Everything else can be removed without any addons the pumps the air tubes and the air injection drivers. It is also recommended to.

This video will help you install the Air Induction Pump Bypass Module in a Toyota Sequoia or Tundra that can be purchased on Ebay. Although the vehicle has only 30330 miles and Ive never off-roaded or abused the truck in any manner its repair record. The Secondary Air System Air Induction System shows that it has completed and is functioning properly.

F and the bypass module installed. After looking online I saw its a pretty common problem on Toyota with the secondary air injection pump seizing. This is how I fixed the Air Injection Switching Valve.

Mechanic says it will cost 2600 dollars to replace two air injection pumps due to possibl. Toyota AIP Bypass Kit May 25 2015. 2 air switching valves are controlled by two vacuum switching valves and only uses a single pressure sensor under the intake.